Our website uses cookies to give you the most optimal experience online by: measuring our audience, understanding how our webpages are viewed and improving consequently the way our website works, providing you with relevant and personalized marketing content.
You have full control over what you want to activate. You can accept the cookies by clicking on the “Accept all cookies” button or customize your choices by selecting the cookies you want to activate. You can also decline all non-necessary cookies by clicking on the “Decline all cookies” button. Please find more information on our use of cookies and how to withdraw at any time your consent on our privacy policy.

Managing your cookies

Our website uses cookies. You have full control over what you want to activate. You can accept the cookies by clicking on the “Accept all cookies” button or customize your choices by selecting the cookies you want to activate. You can also decline all non-necessary cookies by clicking on the “Decline all cookies” button.

Necessary cookies

These are essential for the user navigation and allow to give access to certain functionalities such as secured zones accesses. Without these cookies, it won’t be possible to provide the service.
Matomo on premise

Marketing cookies

These cookies are used to deliver advertisements more relevant for you, limit the number of times you see an advertisement; help measure the effectiveness of the advertising campaign; and understand people’s behavior after they view an advertisement.
Adobe Privacy policy | Marketo Privacy Policy | MRP Privacy Policy | AccountInsight Privacy Policy | Triblio Privacy Policy

Social media cookies

These cookies are used to measure the effectiveness of social media campaigns.
LinkedIn Policy

Our website uses cookies to give you the most optimal experience online by: measuring our audience, understanding how our webpages are viewed and improving consequently the way our website works, providing you with relevant and personalized marketing content. You can also decline all non-necessary cookies by clicking on the “Decline all cookies” button. Please find more information on our use of cookies and how to withdraw at any time your consent on our privacy policy.

Skip to main content

SkyMon Carrier Monitoring

Sophisticated and fully automated satellite carrier monitoring system

Request a quote

Carrier Monitoring

 

SkyMon is a sophisticated, fully-automated radio frequency traffic monitoring system, which provides you with all the necessary tools for continually monitoring the links between your satellites and your ground stations from one central hub, obviating the need for investments at your various locations around the globe.

SkyMon improves the capability of satellite providers/telecom companies to react promptly and effectively to anomaly events and to provide assistance for activities, such as controlling access to the satellites (carrier line-ups) and solving problems (e.g. analyzing interference and carrier performance).

Benefits

Icon

One system for all ground stations and satellites

The most outstanding feature of SkyMon is its multisite capability. All monitoring sites can be combined to a single point-controlled system. This means that you can monitor and control all your traffic from all your satellites with one single system. The client-server architecture allows client applications to be connected anywhere on the network. Measurements can be performed at any site and merged together.

Lower investment expenditure thanks to optimal use of resources

SkyMon puts the monitoring resources (i.e. monitoring antennas and measuring devices) in the configuration database to optimum use. The way these resources are managed is totally automatic and transparent to the user. For each measurement the system selects the monitoring resources from the pool of available resources based on the configuration data.

Reuse of existing infrastructure

SkyMon supports a wide range of monitoring equipment, like spectrum analyzers, down converters, switching units, etc. For more information, see “Measurement devices”. Thanks to the modular concept of the system architecture, upgrading to new equipment can be done at any time by adding plug-in modules to the system without having to change the SW kernel. All users can upgrade their systems by simply purchasing new module licenses.

Easily adaptable to support the daily tasks of operators

Since SkyMon was developed in cooperation with satellite operators, its architecture and functionality is optimized to support users in their daily tasks. Different reports are defined to make it easier for users to create reports from archived data up to the latest measurements that have not even been stored in a database. Measurement parameter settings (instrument settings, path description) are stored together with the measurements and are used for reports.

Key features

Automatic background mode

Monitors the traffic in a round-robin fashion – 24 hours a day, 7 days a week – without any operator interaction. Background monitoring is automatically distributed to all monitoring sites and rescheduled if one site fails.

Active foreground mode

Different measurement modes (foreground modes) are available, which provide different levels of control of the selected device and different levels of measurement data output. Foreground mode is always initiated by a user request.

Blind-scanning high-performance DSP demodulation is used to scan and detect individual carriers. The system provides user-friendly point-and-click operations to add identified carriers to the frequency plan database for automatic monitoring.

Hidden carrier detection

The system evaluates the error vector signal, which enables detection of interfering in-band spurious signals without deteriorating ongoing transmissions. The underlying carrier noise and interference spectra are presented in the same display plot that also shows the measured carrier spectra, separated by different colors.

Interference localization

In order to geographically localize the source of interfering signals, the system comes with an integrated interference localization function.

SkyMon is the only system that provides detection and localization of interference sources fully integrated in one system.

Architecture

Single architecture

In single-site architectures, all SkyMon components can be installed on one single unit, the so-called SkyMon BOX. It combines the entire SkyMon monitoring software with a powerful DSP monitoring device on one single rack-mounted server.
In addition to the integrated DSP monitoring device, SkyMon supports a lot of COTS DSP or swept-spectrum analyzers. This permits the configuration of several monitoring devices even in single-site architectures.

Multi-site architecture

The most outstanding feature of SkyMon is its multisite capability. All monitoring sites can be combined (e.g. via Internet (VPN) or a customer’s Wide Area Network) to a single point-controlled system. The client-server architecture allows client applications to be connected anywhere on the network. The multi-site interface component allows measurements to be performed at any site and then merged together.
Background monitoring is automatically distributed to all monitoring sites and re-scheduled if one site fails.

Applications

The system offers a wide range of useful applications to the operator. Each system consists of the basic carrier monitoring functionalities, which provide the operator with basic RF measurements, like spectrum monitoring, measurement of power, center frequency, bandwidth, etc.

On top of the basic carrier monitoring functionalities the system also offers enhanced applications, like DSP measurements or transponder performance monitoring.

Basic Carrier Monitoring

The SkyMon Base system offers operators the most useful foreground modes for basic carrier monitoring:

Real-time carrier mode

Gives the operator limited control of a manually-selected monitoring device. In this mode, SkyMon allows resource sharing for this monitoring device. Basically, the real-time carrier mode permits defining the most important settings of a monitoring device to be able to visualize the spectrum of the signal received by that device and to store/retrieve the displayed spectra.

Selected carrier mode

In this mode consecutive measurements on one or several manually selected carriers or beacons are performed. Device sharing with other operators is possible. After the operator has activated the measurement cycle, a list showing the measurement results in real time will be displayed.

Standard carrier measurement parameters

Typical carriers monitored by SkyMon are:

  • Digital carriers
  • FM-TV signals
  • TDMA signals
  • VSAT signals
  • CW signals

On each type of carrier the system provides accurate measurements of the following parameters:

  • Carrier EIRP
  • Carrier-center frequency
  • Carrier-occupied bandwidth
  • Carrier-to-noise C/N and carrier-to-noise density ratio C/No
  • -3dB/-10dB bandwidth for digital modulated signals
  • Power spectral density
  • Spurious signal detection and spurious signal measurement.

Beacon monitoring (EIRP, Frequency, C/N)

From a measurement point of view, a beacon signal is treated in the same way as any other carrier. From a configuration point of view, the operator can choose to use either dedicated entry fields provided within the space-segment configuration or to configure the beacon as an individual carrier (as indicated in the figure below). All SkyMon monitoring features (foreground, background) are applicable, regardless of the way a beacon signal is configured.

Beacon signals are treated in the same way as carrier signals. Therefore the same automated storage, scheduling and report mechanisms are applicable.

Automatic measurement scheduling with steerable antennas

The system allows the assigning of monitoring antennas to traffic pertaining to a particular satellite coverage (beam).

If the dedicated antennas are equipped with a tracking system, SkyMon can automatically point the antenna to the satellite(s) assigned for monitoring.

Limit checking

The presence of spurious signals (unauthorized carriers) is detected by means of a nominal traffic plan configuration, including dedicated masks. This means that the measured spectrum is compared to the expected mask, incremented by an individually configurable threshold (spurious detection threshold).

In case of interfering signals (mask violation), a spurious alarm will be triggered.

Events and alarms

The system distinguishes between alarms and events. Events are declared for out-of-limit measurements, such as exceeding a threshold (measurement events) or system anomalies (non-measurement events), such as malfunction of a device or simple logging tasks. Events may be classified in groups and linked to alarms.

Automatic Background Mode

In the background mode SkyMon continuously monitors the traffic defined in the space segment configuration in a round-robin fashion, i.e. each satellite, transponder and carrier (or group of carriers) is scanned separately for each polarization in ascending order, according to its frequency.

SkyMon puts the monitoring resources (i.e. monitoring antennas and devices) assigned to the background mode in the configuration database to optimum use. The way these resources are managed is totally automatic and transparent to the user. For each measurement the system selects the monitoring resources from the ones available in accordance with the configuration data.

For each background monitoring scan SkyMon stores the measurement data in the measurement database and checks them against configurable thresholds. An event or alarm is triggered if the threshold limits are exceeded.

Foreground Measurements

In addition to the real-time carrier and selected carrier modes, which are part of the SkyMon Base, the system offers additional foreground modes:

  • DSP Selected Carrier Mode
  • Selected Band Mode
  • Line-Up Mode

DSP Selected Carrier Mode


Similar to the Selected Carrier Mode, the DSP Selected Carrier Mode supports continuous monitoring of a user-defined group of digital carriers. Other than with the Selected Carrier Mode functionality, the measurements are performed by automatically demodulating and decoding each carrier to get the measurement results.

Furthermore, this measurement mode provides carrier-cross-polarization discrimination measurements by simultaneously acquiring co- and cross-polarization signals, followed by correlation signal processing. This approach provides accurate XPDM results without interruption of operational services (no need to switch to CW mode, no need to ‘see’ the carrier signal on the xpol spectrum). Thanks to the signal processing applied, this measurement is independent of noise and/or leakage from cross-polarization traffic.

Selected Band Mode

In this mode the system executes a one-shot scanning of a transponder or transponder portion selected by the user and performs the same types of measurements as those relevant for the background mode, including spurious signal detection.

Line-Up Mode

This mode is specifically designed to assist the operator during line-up activities. It provides continuous scanning of the portion of a transponder that hosts the carrier to be up-linked (lined up). The Line-Up Mode itself consists of three sub-modes, referred to as: CW, CW-EDF and Modulated Line-Up Mode.

Visualization of both the co-polar and the cross-polar spectra on one single screen, together with the measured polarization isolation:

It is possible to ensure simultaneous measurement of the cross-polar and copular values from two different sites and at different center frequencies. The system automatically selects the setting of the monitoring device.

DSP Measurements

Carrier Monitoring Systems are used for supervision of the radio traffic in satellite communication systems. Due to the use of new modulation techniques and dynamically changing traffic situations, monitoring systems are increasingly employed to support the operator with enhanced analyses tools as well as improved demodulation and automatic carrier detection methods.

The foreseeable increase of satellite channels in the near future will force satellite operators to carefully supervise signals for being able to guarantee high signal qualities to their users. Hence, speed of measurement, flexibility in measuring a great variety of signal parameters, including baseband demodulation parameters and cost-efficient solutions, will be necessary. For this purpose, SkyMon provides additional information (characterization of carriers and additional measurement results) and an analysis feature (blind scanning, signal-under-carrier detection and measurement, compression point analysis, etc.). In addition, SkyMon measurement speed will be significantly increased by DSP signal analyzers.

Blind scanning

Detected Carrier Selection and Transfer to the DB
SkyMon DSP demodulation permits automatic detection of data rates and modulation schemes of individual carriers. In order to provide high modulation recognition, the relevant algorithms are designed to identify the relevant demodulation schemes (BPSK, QPSK, 8PSK, 16QAM, etc.) and demodulation parameters (symbol rate, shaping filter, roll-off, center frequency, etc.). The individual carriers and their demodulation parameters are presented in the selected band result list together with the already existing RF measurement results.

Signal-under-carrier detection

This feature offers troubleshooting in case of cross-polarization interference or locally generated interference, while the carrier remains in service. Providing the error vector magnitude spectra enhances the automatic as well as user-initiated foreground-monitoring modes with in-band noise and interference measurement capabilities, while the desired carriers remain in service. Therefore, the system evaluates the error vector signal, which enables the detection of interfering in-band spurious signals without deteriorating the ongoing transmission. The carrier underlying noise and interference spectra are presented in the same display plot as the measured carrier spectra, separated by different colors.

In the screenshot above you will find several examples of an interference spectrum (displayed in red), computed from the measured spectra (displayed in blue). What is particularly remarkable in this example is that the hidden carrier spectra (signal under carrier) are also calculated outside the carrier symbol rate frequency ranges and therefore seamlessly concatenated in order to provide successful identification of interference, even if other carriers are affected simultaneously. This algorithm is filed for patent.

Automatic Path Calibration

In order to ensure maximum accuracy, SkyMon has an ingenious built-in calibration subsystem that is capable of automatically calibrating the complete RF downlink path from the antenna feed-up to the monitoring devices (if supported by the RF hardware). Thus, with minimal system performance impact, SkyMon is capable of providing accurate satellite level measurement results and long-term stability.

SkyMon earth station calibration

Equipment calibration

The system permits the self-calibration of each monitoring instrument (spectrum analyzer, vector signal analyzer) as well as the power meter/power sensors.

SkyMon automatically performs the required self-calibration according to a configurable interval for each monitoring instrument. If an additional instrument is entered in the ground segment configuration, a default value, reflecting the manufacturer’s recommendations, will be set by default.

The system is capable of zeroing the reading of each power head/power sensor and of calibrating it by connecting a reference signal generator (50MHz, 0dBm) to the power sensor via the calibration switches. The periodicity of this self-calibration is set according to a configurable interval.

RF downlink path calibration

The system is capable of calibrating each antenna’s downlink path from the low noise amplifier’s input up to the monitoring device by injecting a reference signal to the input of the LNA via the antenna coupling system, and simultaneously measuring the relevant power value with a power sensor/meter and a monitoring device.

The path loss between each injection point and the relevant power sensor is used to refer the power meter reading to the injection point, which provides the basis for calculating the path gain. The path loss can be entered in the configuration database as a table of values vs. frequency.

The system also selects the level of the injected reference signal to provide the best conditions for calibration with regard to the impact on the overall accuracy of the system power measurements. Periodicity and frequencies can be selected to make sure that a station path calibration sufficiently close in time and frequency has been performed for each carrier measurement in order to counteract the station path gain instability, slope and ripple.

The injection level, the number of calibration points, the frequency range, the calibration method as well as several calibration thresholds can be configured via the GUI (please see the screenshot below).

WEB Interface

Web access to the system is provided via Remote Application Sharing technology. With this approach the SkyMon client application can be virtualized and accessed from any device using an Internet browser. Together with the highly flexible user rights configuration, this solution offers customized web access providing the same client GUI as available on local installations.

Transponder Performance Monitoring

A transparent satellite transponder typically processes the received signals in terms of amplification, filtering and frequency translation before the signals are retransmitted to earth station receivers.

For several reasons a satellite transponder is often required to provide maximum output power. Therefore, it should be operated at its saturation point. One reason is to ensure reliable reception of the retransmitted signals at the earth station receiver even if it rains (usually referred to as rain margin). On the other hand, for many applications the size of the receive antenna aperture is limited due to economical and building permission constraints. Therefore, the receive antenna often has to be as small as possible. However, often a minimum size is required, since small apertures will lead to impaired signal discrimination due to adjacent satellite interference.

At high power levels the relationship between input signal power and output signal power in satellite transponder amplifiers becomes increasingly non-linear. This behavior can be seen in the gain transfer curve and varies, depending on the design and technology of the transponder applied. The signals’ mean power level at the gain transfer curve on which transponder operation is based is usually referred to as operating point.

In case of high-power transmission, the signal tends to show non-linear distortion, jeopardizing the quality and reliability of the satellite communication link. With regard to digital transmission, many services are sensitive and susceptible to amplitude-to-amplitude (AM/AM) and amplitude-to-phase shift (AM/PM) conversion introduced by high power amplification. The corruption of the transmitted signal leads to increased intermodulation components, which deteriorates system quality parameters, such as symbol and bit error rates (SER, BER). Consequently, a compromise has to be found between high transmission power levels (increasing Eb/No) and increased intermodulation components, caused by operating the satellite transponder beyond its linear gain limitation (increasing SER, BER). Whereas usually some compression is tolerable, operation beyond a certain level of saturation leads to unacceptably high signal distortion. The goal is to have an optimum operating point, which is determined by finding the maximum output power, while maintaining the specified BER.

Furthermore, satellite providers want to be able to monitor the transponder transfer characterization and compression behavior in order to provide sustained reliability and quality of service to their customers.

To make this possible a new foreground mode has been created: the Transponder Performance Mode. It displays a diagram of output vs. relative input power of a selected transponder. Together with the gain curve, the phase shift as well as the:
• Point of operation (mean power EIRP)
• Delta from linear operation
• OBO from 1 dBCp, if applicable,
is displayed.

The figure above shows an example of the measured gain transfer curve of a transponder loaded with a single carrier and operated close to saturation (OBO: 0 dB). The AM/AM characteristic is indicated in blue, while the AM/PM characteristic is indicated in red. The point of operation (mean power) is indicated by the pink mark and the saturation point by a green mark on the AM/AM curve.

Measurement Devices

With the SkyMon family you do not depend on just a few specific measurement devices. SkyMon comes with several drivers for supporting a great variety of devices and, if necessary, even more instruments can be integrated into the driver library. Please contact us for detailed information and data sheets.

Space refereces

Interested in our SkyMon Carrier Monitoring solution?